🤖 Dan Huynh

Search

SearchSearch
          • 1st Law of Thermo
          • 2nd Law of Thermo
          • Convection
          • Energy Transfer
          • Enthalpy
          • Entropy
          • Heat Transfer
          • Heat Transfer Fins
          • Ideal Gas
          • Mass and Energy for Open System
          • Maximum Work
          • Moving Boundary Work and Polytropics
          • MTE 309 - Thermodynamics and Heat Transfer
          • Phase Changes
          • Processes
          • Radiation
          • Specific Heat
          • State Postulate
          • States and Equilibrium
          • Steady Flow Devices
          • Subcooled Liquids
          • Thermal Circuits and Conduction
          • Thermal Energy
          • Thermodynamic Basics (Systems and Properties)
          • Thermodynamic State
          • Transient Heat Transfer
          • Work
          • Work Efficiency
          • AC Circuits
          • Angular Kinematics
          • Circuits Review
          • Complex Numbers
          • Core Magnetization
          • DC Machines
          • Delta Connections
          • Eddy Currents
          • Electromagnetism
          • Generation of Force in a Magnetic Field
          • Hysteresis
          • Impedance
          • KVL and KCL
          • Linear Circuit
          • Magnetic Circuit Analysis
          • Magnetic Circuits
          • Magnetic Fields
          • MTE 320 - Actuators and Power Electronics
          • Phasors
          • Power
          • Power Electronics
          • Power Generation
          • RMS
          • Solenoids (Electromagnets)
          • Three Phase Circuits
          • Transformers
          • Acceleration Analysis
          • Axial Loads and Normal Strain
          • Beams and Loading
          • Centroids
          • Deflection and the Elastic Curve
          • Dynamics Fundamentals + Analysis
          • Endurance Limit Modifying Factors
          • Equilibrium
          • Failure Theories
          • Fatigue Failure
          • Four Bar Linkage
          • Grashof Condition
          • Gruebler’s and Kutzbach’s Equations
          • Kinematics
          • Method of Superposition
          • Mohr's Circle
          • MTE 321 - Design and Dynamics of Machines
          • Notch Sensitivity
          • Position Analysis
          • Shaft Design
          • Shear Force and Bending Moments
          • Static Failures
          • Stress and Stress Transformation
          • Stress Concentration
          • The Stress-Life Method and S-N
          • Torsion
          • Two-Plane Bending
          • Velocity Analysis
            • MTE 325 Lab Session 2
          • 325 Final Lab Submission
          • 325 Midterm Prep
          • Analog Interfaces
          • Arbitration
          • Asynchronous Busses
          • Asynchronous Systems
          • Blind Synchronization
          • Buses and Data Transfer
          • CAN
          • Clock Signals
          • Computer Interfacing
          • CPU Notification
          • Data Characteristics
          • Data Generation
          • Data Notification
          • Data Transfer
          • Device Selection
          • Direct Memory Access
          • Drivers
          • Embedded Security
          • Embedded Systems Design
          • Generalized IO
          • Interrupt Service Routines
          • ISR Selection
          • Memory
          • Metastabillity
          • Microprocessors and Microcontrollers (CPU)
          • MMIO
          • MTE 325 - Microprocessor Systems and Interfacing
          • MTE 325 Assignments
          • Parallel Interfacing
          • Pointers
          • Serial Interfacing
          • Signal Representations
          • Synchronization
          • Synchronous Bus Read
          • Synchronous Bus Write
          • Synchronous Systems
          • System Views
          • Transistors
          • Block Diagrams
          • Coordinate References
          • Damping and Damped Systems
          • Electromechanical Systems
          • Energy
          • Equivalent Mass and Inertia
          • Euler’s Identity
          • Forces
          • Frequency Domain Analysis
          • Gears
          • General Planar Motion
          • LaPlace Transforms
          • Levers
          • Lumped vs Distributed Systems
          • Matlab + Simulink
          • Modeling
          • Newtons 2nd Law
          • Rack and Pinions
          • Rayleigh's Method
          • Rotational Mechanics
          • Sliding vs Rolling Motion
          • Spring Elements
          • State Variable Models
          • SYDE 351 - Systems Models 1
          • Systems
          • Time Domain Analysis
          • Translational Mechanics
          • Use of Models
          • Repository Design Pattern
          • WKRPT 300 - Overview
        • 3A
          • Cash Flow Analysis
          • Financial Comparison Methods
          • Financial Management and Business Planning
          • Inflation
          • MSE 261 - Engineering Economics
          • Project Management
          • Public Center Decision Making (B-C Ratio)
          • Replacement Analysis
          • Taxes
          • Time Value of Money
          • Uncertainty and Risk
          • MSE 442 - Impact of Information Systems on Organizations and Society
          • Arrangement and Mounting of Bearings
          • Bearing Load Analysis and Size Selection
          • Bearing Load Analysis for Combined Loads
          • Bearing Lubrication and Sealing
          • Bearings
          • Bevel Gears
          • Brushless DC Motors
          • Formal Gear Strength Analysis
          • Helical Gears
          • Induction Motors
          • MTE 322 - Electromechanical Machine Design
          • Permanent Magnet Synchronous Motors
          • Power Screws
          • Power Transmission Systems
          • PWM
          • Rolling Element Bearings
          • Selecting Gears
          • Spur Gears
          • Stepper Motors
          • Worm Gears
          • Acceleration
          • Bernoulli's Principle
          • Control Volumes
          • Dimensional Analysis
          • Fluid in Rigid Body Motion
          • Fluid Systems
          • Fluids
          • Forces on a Fluid Package
          • Kinetic Energy
          • Laminar and Turbulent Flow
          • MTE 352 - Fluid Mechanics 1
          • Path Lines
          • Pipe Flow
          • Pressure and Hydrostatics
          • Pressure Over Submerged Surfaces
          • Rotation
          • Scalar Fields
          • Stagnation Point
          • Streak Line
          • Stream Lines
          • Vector Fields
          • 1st Order Dynamic Systems
          • 2nd Order Dynamic Systems
          • Bode Plot
          • Dynamic Systems
          • Electric Motors
          • Feedback Controls
          • Feedforward Controls
          • Gain Margin and Phase Margin for Controls
          • Linearity
          • Loop Shaping
          • MTE 360 - Automatic Control Systems
          • Proportional Controls
          • Root Locus Design Method
          • Stability
          • Synthetic Division
          • Tracking and Steady State Error
          • Transfer Functions
            • Lego S&R Brainstorm
          • Conceptual Designs
          • Drawing 2025-02-13 12.58.12.excalidraw
          • Engineering Design
          • MTE 380 - Mechatronics Engineering Design Workshop
          • Need Analysis
        • 3B
        • Course Selections
          • Co-op Applications
        • Old Resume Points
          • Investing
          • One Up on Wall Street
          • Football
          • Golf
          • Kinetic Chain
          • Pickleball
        • Fitness
        • Golf
        • Progressive Overload
        • Running
        • Volume
          • Duplicate Exercises
        • Hevy
          • Backtracking
          • BST Traversal
          • Depth First Search
          • Kadane’s Algorithm
        • Leetcode
        • Leetcode - 2 Sum
        • Leetcode - 3Sum
        • Leetcode - Best Time to Buy and Sell Stock
        • Leetcode - Binary Tree Level Order Traversal
        • Leetcode - Binary Tree Maximum Path Sum
        • Leetcode - Combination Sum
        • Leetcode - Construct Binary Tree from Preorder and Inorder Traversal
        • Leetcode - Container With Most Water
        • Leetcode - Contains Duplicate
        • Leetcode - Counting Bits
        • Leetcode - Design Add and Search Words Data Structure
        • Leetcode - Find Median From Data Stream
        • Leetcode - Find Minimum in Rotated Sorted Array
        • Leetcode - Find Pivot Index
        • Leetcode - Group Anagrams
        • Leetcode - Implement Trie (Prefix Tree)
        • Leetcode - Insert Interval
        • Leetcode - Invert Binary Tree
        • Leetcode - Kth Smallest Element in a BST
        • Leetcode - Linked List Cycle
        • Leetcode - Longest Consecutive Sequence
        • Leetcode - Longest Repeating Character Replacement
        • Leetcode - Longest Substring Without Repeating Characters
        • Leetcode - Lowest Common Ancestor of a Binary Search Tree
        • Leetcode - LRU Cache
        • Leetcode - Maximum Depth of Binary Tree
        • Leetcode - Maximum Length of a Concatenated String with Unique Characters
        • Leetcode - Maximum Number of Balloons
        • Leetcode - Meeting Rooms
        • Leetcode - Meeting Rooms II
        • Leetcode - Merge Intervals
        • Leetcode - Merge K Sorted Linked Lists
        • Leetcode - Merge Two Sorted Lists
        • Leetcode - Minimum Window Substring
        • Leetcode - Missing Number
        • Leetcode - Non-overlapping Intervals
        • Leetcode - Number of 1 Bits
        • Leetcode - Product of Array Except Self
        • Leetcode - Remove Nth Node From End of List
        • Leetcode - Reorder List
        • Leetcode - Reverse Bits
        • Leetcode - Reverse Linked List
        • Leetcode - Same Tree
        • Leetcode - Search in Rotated Sorted Array
        • Leetcode - Serialize and Deserialize Binary Tree
        • Leetcode - String Encode and Decode
        • Leetcode - Subtree of Another Tree
        • Leetcode - Sum of Two Integers
        • Leetcode - Top K Elements in List
        • Leetcode - Valid Anagram
        • Leetcode - Valid Palindrome
        • Leetcode - Valid Parentheses
        • Leetcode - Validate Binary Search Tree
        • Leetcode - Word Search
        • Leetcode - Word Search II
          • Repository Design
          • Strategy
        • SE Resources
        • AI Option
        • Mechanical Engineering
        • Mechatronics Engineering
        • MME
        • Professional Development
        • SE Option
        • University of Waterloo
        • URA
      • Car Maintenance
      • Christmas 2024
      • Commuting
      • Compound Effect
      • DJing
      • Existentialism
      • Guns
      • Layers
      • Love
      • Obsidian
      • Oscilloscopes
      • RIB fest Kitchener 2024
      • Route Planning
      • Unlisted Github Repos
      • UW Study Spots
      • Vim
        • Leadership
        • Perceptions
        • Radar Velocity Detection
        • Unifying Camera Detection
        • WATO Stack
        • Watonomous Cheatsheet
      • NFL Confidence Pool Picks
      • Drawing 2024-05-14 14.28.28.excalidraw
      • Drawing 2024-05-14 16.11.39.excalidraw
      • Drawing 2024-05-28 16.42.36.excalidraw
      • MTE 320 Examples
      • MTE 325 Diagrams
      • SYDE 351 Diagrams
      • WATO Diagrams
        • (TEMPLATE) Daily

    May 31, 20251 min read

    AC Circuits

    Complex Variables

    See Circuits Review
    Complex variables use Complex Numbers

    Single Phase AC Circuits

    Solved using Phasors.

    Three Phase AC Circuits

    Better single phase AC circuits.
    See Three Phase Circuits

    Graph View

    • Complex Variables
    • Single Phase AC Circuits
    • Three Phase AC Circuits

    Backlinks

    • Transient Heat Transfer
    • Circuits Review
    • MTE 320 - Actuators and Power Electronics

    Created with Quartz v4.2.3 © 2025

    • Portfolio
    • GitHub
    • LinkedIn